Main Usage:

Medical Orthopedic Splint is an external fixation product that uses when fracture, sprain and strain, which is an ideal fixed splint before detumescence. It can protect injured area, avoid hurt, reduce pain, prevent hit and make patients move conveniently and make X ray easy to diagnose.

Performance characteristics:

1. Easy to use(Easy operation, no need to wear gloves)

2. High strength(20 times of normal plaster bandage)

3. Light weight(20% of normal plaster bandage)

4. Good breathability(Make skin breathe, metabolize normally to prevent bacteria)

5. Good waterproofness(Can dry it by blow dryer after shower)

6. Pervious to x light(100% X-ray light transmittance, no need to take apart when do X-ray on further consultation)

7. Good Formability(Good figurability and flexibility)

8. Green Initiative(Cleanliness, free from dust, no toxicity, no pollution, no cause skin irritation)

Specifications:

Model Specification Packaging

JB312 7.5cm*30cm 20bags*6case

JB336 7.5cm*90cm 10bags*6case

JB416 10.0cm*40cm 20bags*6case

JB430 10.0cm*75cm 10bags*6case

JB530 12.5cm*75cm 10bags*6case

JB546 12.5cm*115cm 5bags*6case

Instructions:

1. Choose corresponding specification according to different parts, no need to wear gloves for doctors.

2. Open the package and make orthopedic casting tape soak in the moderate water for 3 to 6 seconds and squeeze 2 to 3 times at the same time.

3. Squeeze or wipe out excess water by using dry towel.

4. Use splint to cover the fixed part that requests and wind by gauze bandage or elastic bandage.

5. Shape according to the request.

Matters need attention:

1. To wind close to the fixed part, don't be too tight through pulling in case that it won't influence blood circulation after solidification.

2. The Orthopedic Splint is winded over gauze and cotton-padded covering to avoid the direct contact with human skin.

3. Don't move before solidification so as not to cause fracture.

4. No stretching at the end of the splint, but let it bond naturally.

5. The appearance should be stroked lightly to shape after finishing winding, which makes them bond fully between layers to increase the adhesiveness of the splint.

6. It is normal phenomenon when you feel warm during splint solidification.

7. It is necessary to dry the splint when it gets damp after solidification to avoid the inflammation of skin.

8. Electric saw and scissors can be used to knock down splint, which should be careful to scratch skin since it is very sharp after knocking down.

9. The splint can be transported by general vehicles, but it should prevent heavy load, direct sunlight and steeping by rain and snow during delivery.

10. No damage to the package of the splint in case that it will harden and lose effect.

Guarantee period:

24 months